Oracle 10 参数配置详解

发布时间：2023-03-11 12:35:52 所属栏目：教程来源：

导读：semsys:seminfo_semmni
Description
Maximum number of semaphore identifiers.

Data Type
Signed integer

Default
10

Range
1 to 65,535

Dynamic?
No

Validation
Compared to SEMA_INDEX_MAX

semsys:seminfo_semmni
Description
Maximum number of semaphore identifiers.

Data Type
Signed integer

Default
10

Range
1 to 65,535

Dynamic?
No

Validation
Compared to SEMA_INDEX_MAX (currently 65,535) and reset to that value if larger. A warning message is written to the console and or system messages file.

When to Change
When the default number of sets is not enough. Generally changed at the recommendation of software vendors. No error messages are displayed when an attempt is made to create more sets than are currently configured. The application sees a return code of ENOSPC from a semget(2) call.

Commitment Level
Unstable

semsys:seminfo_semmns
Description
Maximum number of System V semaphores on the system.

Data Type
Signed integer

Default
60

Range
1 to MAXINT

Dynamic?
No

Validation
The amount of space that Could possibly be consumed by the semaphores and their supporting data structures is compared to 25% of the kernel memory available at the time the module is first loaded. If the memory threshold is exceeded, the module refuses to load and the semaphore facility is not available.

When to Change
When the default number of semaphores is not enough. Generally changed at the recommendation of software vendors. No error messages are displayed when an attempt is made to create more semaphores than are currently configured. The application sees a return code of ENOSPC from a semget(2) call.

Commitment Level
Unstable

semsys:seminfo_semvmx
Description
Maximum value a semaphore can be set to.

Data Type
Unsigned short

Default
32,767

Range
1 to 65,535

Dynamic?
No

Validation
None

When to Change
When the default value is not enough. Generally changed at the recommendation of software vendors. No error messages are displayed when the maximum value is exceeded. The application sees a return code of ERANGE from a semop(2) call.

Commitment Level
Unstable

semsys:seminfo_semmsl
Description
Maximum number of System V semaphores per semaphore identifier.

Data Type
Signed integer

Default
25

Range
1 to MAXINT

Dynamic?
No

Validation
The amount of space that Could possibly be consumed by the semaphores and their supporting data structures is compared to 25% of the kernel memory available at the time the module is first loaded. If the memory threshold is exceeded, the module refuses to load and the semaphore facility is not available.

When to Change
When the default value is not enough. Generally changed at the recommendation of software vendors. No error messages are displayed when an attempt is made to create more semaphores in a set than are currently configured. The application sees a return code of EINVAL from a semget(2) call.

Commitment Level
Unstable

semsys:seminfo_semopm
Description
Maximum number of System V semaphore operations per semop(2) call. This parameter refers to the number of sembufs in the sops array that is provided to the semop() system call.
Data Type
Signed integer

Default
10

Range
1 to MAXINT

Dynamic?
No

Validation
The amount of space that Could possibly be consumed by the semaphores and their supporting data structures is compared to 25% of the kernel memory available at the time the module is first loaded. If the memory threshold is exceeded, the module refuses to load and the semaphore facility is not available.

When to Change
When the default value is not enough. Generally changed at the recommendation of software vendors. No error messages are displayed when an attempt is made to perform more semaphore operations in a single semop call than are currently allowed. The application sees a return code of E2BIG from a semop() call.

Commitment Level
Unstable

semsys:seminfo_semmnu
Description
Total number of undo structures supported by the System V semaphore system.

Data Type
Signed integer

Default
30

Range
1 to MAXINT

Dynamic?
No

Validation
The amount of space that Could possibly be consumed by the semaphores and their supporting data structures is compared to 25% of the kernel memory available at the time the module is first loaded. If the memory threshold is exceeded, the module refuses to load and the semaphore facility is not available.

When to Change
When the default value is not enough. Generally changed at the recommendation of software vendors. No error message is displayed when an attempt is made to perform more undo operations than are currently configured. The application sees a return value of ENOSPC from a semop(2) call when the system runs out of undo structures.

Commitment Level
Unstable

Changes From PrevIoUs Release
For information, see semsys:seminfo_semmnu.

semsys:seminfo_semume
Description
Maximum number of System V semaphore undo structures that can be used by any one process.

Data Type
Signed integer

Default
10

Range
1 to MAXINT

Dynamic?
No

Validation
The amount of space that Could possibly be consumed by the semaphores and their supporting data structures is compared to 25% of the kernel memory available at the time the module is first loaded. If the memory threshold is exceeded, the module refuses to load and the semaphore facility is not available.

When to Change
When the default value is not enough. Generally changed at the recommendation of software vendors. No error messages are displayed when an attempt is made to perform more undo operations than are currently configured. The application sees a return code of EINVAL from a semop(2) call.

Commitment Level
Unstable

semsys:seminfo_semaem
Description
Maximum value that a semaphore's value in an undo structure can be set to.

Data Type
Unsigned short

Default
16,384

Range
1 to 65,535

Dynamic?
No

Validation
None

When to Change
When the default value is not enough. Generally changed at the recommendation of software vendors. No error messages are displayed when an attempt is made to perform more undo operations than are currently configured. The application sees a return code of EINVAL from a semop(2) call.

Commitment Level
Unstable

（编辑：汽车网）

【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容!